- help@keylockdubai.com
- Al Satwa, Dubai, United Arab Emirates
0
+
Expert Team
Car key cutting is the process of shaping a metal key blank to match the lock profile of a vehicle’s door, ignition, or trunk. A locksmith uses a mechanical, code-based, or laser cutting machine to produce the correct cut pattern. Modern car keys also contain transponder chips or smart key circuits that require electronic programming after cutting. The result is a working key that operates the car’s locks and starts the engine.
Key Lock Dubai provides mobile car key cutting services across Dubai. Our technicians arrive at your location with professional cutting machines and programming tools. We cut and program keys for all car brands on site. Most car keys are ready within 15 to 30 minutes. Call 0523597886 or WhatsApp us for same-day car key cutting.
Side-cut keys have grooves cut along one or both edges of the blade. They were standard in older vehicles and are still used in some budget and fleet models. Cutting a side-cut key takes under 5 minutes using a mechanical tracing machine or code cutter.
Laser-cut keys have a winding groove milled along the centre of the blade. They are thicker than standard keys and can be inserted into the ignition from either direction. Brands that use laser-cut keys include BMW, Mercedes-Benz, Audi, Volkswagen, Volvo, Ford (selected models), and Jaguar Land Rover. Cutting requires a CNC or laser key machine with exact depth specifications.
Transponder keys contain a small electronic chip embedded in the plastic head. The chip sends a signal to the car’s immobilizer. If the signal does not match, the engine will not start. After cutting the blade, we program the chip using diagnostic tools. See our car key programming page for the full programming process.
Smart keys allow keyless entry and push-button start. They stay in your pocket while the car detects them via radio frequency. Some smart keys include an emergency metal blade inside the fob for manual door opening. Programming a smart key requires brand-specific software. Visit our car key replacement page for smart key services.
Flip keys combine a traditional cut blade with remote lock/unlock buttons in a single fob. The blade folds into the housing. Common in Toyota, Nissan, Hyundai, Kia, Volkswagen, and Skoda. We cut the blade and program the remote and transponder in one visit.
Many cars include a thin emergency key that opens the driver’s door but does not start the engine. We cut replacement emergency keys from code when the original is lost.
From an existing key (duplication). We trace the original key onto a blank using a mechanical cutting machine. This is the fastest method. It takes 5 minutes.
From key code. If you have lost all keys, we obtain the key code from the vehicle’s VIN, the lock cylinder, or the manufacturer. We enter the code into our software and the machine cuts the key from scratch. No original key needed.
From lock decode. If no key and no code exist, we remove a lock cylinder from the vehicle, decode the pin/wafer configuration, and cut a key to match. The lock is reassembled without damage.
After cutting, electronic programming follows. We connect to the vehicle’s OBD port and register the new key with the immobilizer and ECU. We use tool brands, e.g., Silca, Keyline, Zed-Full, Autel MaxiIM, Lonsdor, AVDI equipment.
Origin | Brands |
Japanese | Toyota, Lexus, Nissan, Infiniti, Honda, Mitsubishi, Mazda, Suzuki, Subaru |
Korean | Hyundai, Kia, Genesis |
German | BMW, Mercedes-Benz, Audi, Volkswagen, Porsche, Mini |
American | Ford, Chevrolet, GMC, Jeep, Dodge, Chrysler, Cadillac |
British | Land Rover, Range Rover, Jaguar |
French | Renault, Peugeot, Citroen |
Chinese | Changan, Geely, MG, GAC, Chery, Haval |
Other | Volvo, Tesla, Maserati, Ferrari, Bentley, Rolls-Royce |
If your car brand is not listed, call us. We cut keys for virtually every make and model on UAE roads.
Car key cutting costs depend on the key type, vehicle brand, and whether programming is required.
Service | Starting From (AED) |
Standard side-cut key (cut only) | AED 10-35 |
Laser-cut key (cut only) | AED 100-250 |
Transponder key (cut + program) | AED 150-500 |
Flip key / remote head key (cut + program) | AED 180-700 |
Smart key / proximity fob (program only) | AED 200-900 |
All keys lost (cut from code + program) | AED 350-1200 |
Emergency / valet key | AED 50-150 |
Key blade replacement (in existing fob) | AED 50-200 |
Luxury and European vehicles may cost more due to specialized blanks and programming. We quote exact prices over the phone. Call 0523597886 or WhatsApp us
Step 1: Call or WhatsApp. Tell us your car make, model, year, and what happened (lost key, spare needed, broken key).
Step 2: Instant quote. We provide a fixed price based on your vehicle and key type.
Step 3: We come to you. Our technician arrives at your location within 12-35 minutes with cutting machines and programming tools.
Step 4: Cut the key. We cut the blade from your existing key, key code, or lock decode.
Step 5: Program the chip. We connect to the OBD port and register the new key with the immobilizer. Old lost keys are deleted if requested.
Step 6: Full test. We test door lock, trunk, engine start, remote functions, and any keyless features. You pay only after everything works.
Heat damage to key fobs. Leaving a key fob inside a hot car (cabin temperatures can reach 80°C) causes battery failure, circuit board warping, and button malfunction. We replace fob batteries, repair internal circuits, and cut replacement blades for damaged fobs.
Transponder signal loss. Extreme heat can weaken the transponder chip’s signal, causing intermittent starting failures. Reprogramming the chip usually resolves this without replacing the key.
Sand and dust in ignition. Fine sand particles accumulate inside the ignition cylinder, making it harder to insert or turn the key. We clean and lubricate ignition cylinders on site. If the cylinder is worn, we replace it and cut a new key to match. See our ignition repair page.
Key blade wear. Metal keys wear down over time. A worn key may still work in the door but fail in the ignition. We cut a fresh key from the lock code, not from the worn original, to restore proper function.
Call Key Lock Dubai or WhatsApp us with your car make, model, and year. We provide an instant quote, arrive at your location, and cut your car key on site.
Mobile service. We come to your car’s location. Home, office, parking lot, or roadside.
All brands covered. Japanese, Korean, German, American, British, French, Chinese.
Cut and program in one visit. No sending keys to a factory. No 5-day wait. Same-day, on-site.
All keys lost? No problem. We cut from VIN code or lock decode. No original key required.
Dealer-level equipment. Professional diagnostic tools, not cheap aftermarket programmers.
Transparent pricing. Fixed quote before we start. No hidden charges.
24/7 availability. Emergency car key cutting day and night.
We are able to visit you on the spot during and after business hours, as technicians stationed at multiple locations throughout the city.
Client satisfaction is our 1st priority. We guarantee professional, reliable, and efficient car cutting locksmith services.
Get a free consultation today! Expert advice and tailored solutions for all your locksmith needs in Dubai.
Available 24/7 for all your locksmith emergencies. Fast, reliable car key cutting service whenever you need us in Dubai.
Save money with our efficient locksmith technologies. Advanced car key cutting technologies ensure cost-effectiveness and perfect precision for all vehicle makes and models.
Your ultimate locksmith solution for all services including car key cutting. Trust us for comprehensive locksmith needs in Dubai.
We’ve earned trust across the country. Join our satisfied clients belonging to various regions and are consistently satisfied with our exceptional emergency locksmith services.

Entrepreneur
Quick and excellent service! Really amazing job done, Highly recommend for anyone in need of reliable locksmith assistance."

CEO Bciaga
"Outstanding service! Prompt, professional, and reliable. Highly recommend for all locksmith needs. Thank you!"

Businessman
Find answers to common inquiries about our locksmith services, covering lockouts, installations, repairs, pricing, and more.
Car Cutting process usually takes 20-30 minutes but it depends upon the type of the key and your specific requirements.
Yes, Key Lock Dubai offers mobile key cutting services too.For more details contact us (00971) 559058181
Yes, At Key Lock Dubai, we provide key cutting service for all types of car models.
Car key cutting in Dubai costs AED 50-150 for standard mechanical keys, AED 150-250 for transponder keys, and AED 200-300 for smart keys. The price varies based on your car's make and model, with Japanese brands like Toyota and Honda being more affordable than luxury brands like BMW and Mercedes-Benz. Laser-cut keys cost more than traditional keys, and mobile service adds AED 30-50. If you've lost all keys and need VIN code retrieval, expect an additional AED 50-100 for the service.
Yes, emergency car key cutting services are available for 24 hours across Dubai.
Key Lock Dubai offers affordable car key cutting services with high quality work to its valuable clients.
Typically replies within 2 Minutes
Hello, Welcome to the site. Please click below button for talking me through phone call.
"As a business owner, I highly recommend their locksmith service. Prompt, professional, and reliable. Exceptional job!"